User Manual

P380 Users guide
34
Upgrade Utility
P380 can also be configured as a wireless station, but the unit requires full firmware
upgrade, which can not be done in the web site. Therefore the P380 comes with an
upgrade utility, “upgrade.exe ”, to allow the user to perform the task. The program runs
under MS Windows 2000 family and MS Windows XP. Before the program is executed,
the firmware should be located first. It can be found under the root directory in the CD.
When executing the program, the following screen should appear:
Figure 30: Upgrade utility
In the Host address field, enter the P380 IP address for which the firmware is to be
upgraded. Enter the root password and choose Full upgrade. Specify the P380 station
firmware file, before clicking on the “Upgrade” button. When the process is completed,
it will be indicated in the upgrade log window.
Reboot Page