User Manual

P380 Users guide
33
Figure 28: Firmware file selection dialog
When firmware file is selected, its name is shown in the “Firmware” field. Then click on
the “Upgrade” button to upgrade firmware.
A “System Firmware Upgrade Process” screen will be displayed and firmware should be
upgraded as shown below:
Figure 29: System Firmware Upgrade Process Status
A percentage will be showed on the status bar to indicate the upgrade status. After
completed the firmware upgrade, the P380 device will be rebooted automatically.
~Note: The new firmware file overwrites the old one completely. All custom P380
configuration settings will be reset to the default values. Write down all configuration
settings to be preserved, and set up them, when P380 starts after firmware upgrade.
Initial P380 setup is described in the “Starting Up” chapter of this manual.