User Manual

P380 Users guide
27
Figure 22: Connected Clients page
In the “Client MAC address” column, connected wireless card MAC (hardware)
addresses are shown.
Signal and Noise columns show radio signal and noise levels.
The column, “
Rate
”, shows connection bit rate (connection speed) in hundreds of kilobits.
This rate can be easily converted in to megabits by dividing this number by 10. For
example 110 corresponds to 11Mbits, 55 correspond to 5.5Mbits and so on.
Loopback Test
Figure 23: Loopback Test page
Loopback test is used for wireless link diagnostics. This page shows data transfer rate
between P380 and endpoint device (PC running endpoint program). This transfer rate is