User Manual

P380 Users guide
13
Network Configuration Settings page
v Router Mode
In Router mode, LAN (Local Area Network) and WAN (Wide Area Network – For P380,
this can be the enterprise networks on the Internet) configurations can be modified using
the LAN Settings and the WAN Settings tables shown as followed:
Figure 9: Network Configuration Settings page -1 (Router mode)
WAN settings must be set up according to the information provided by the ISP. There is
no such restriction on LAN settings. WAN access can be disabled to restrict LAN users
access to this network.
The masquerade setting enables the users to use the NAT (Network Address Translation)
feature of P380. When this option is enabled, P380 “hides” LAN addresses to the
“external world”. Access to the services, such as web services, provided by servers in the
LAN, can be achieved by using the port forwarding feature.