User's Manual

General System Connection

Default Settings

By default settings, the SOHO AP is regarded as an “AP Router”. The default

settings are shown following.

Note:

In Web configuration mode setup system, only one user allows to access

setup program at one time i.e. setup system will decline when other users to

connect setup system.

User Name admin

Password gemtek

AP Router Name Wireless AP SOHO Wireless LAN

AP Router IP Address 192.168.0.10

AP Router Subnet Mask 255.255.255.0

10/100 Ethernet LAN IP 192.168.0.10

10 Mbps Ethernet WAN IP Obtain from ISP via

DHCP

Can be manually

configure

WAN DHCP Client Enabled After 20 sec. Go to blank

RF ESSID Wireless Gateway

RF Channel 11

RF Roaming Enabled

Encryption Disabled

DHCP Server Enabled

NAT Routing Enabled