User's Manual

 The unit is not receiving the correct voltage from the power supply.

Resolution:

 Download and upgrade the latest firmware.

 Make sure the correct firmware has been used while upgrading. Use only

the firmware provided on GemTek’s web or FTP sites.

 Use only the power adapter provided.

The Link or Act LED’s do not turn on.

Cause:

 The network cable is not connected.

 The network cable is connected but not the right type, whether it is patch

or straight-through.

Resolution:

 Make sure that both ends of the cable are connected.

 Try using another cable.

 If you are using a straight-through cable, try a patch cable and vice-

versa.

Sometimes my Broadband Router stops working or locks up.

Cause:

 Someone has attempted to hack into someone on your LAN.

 The Broadband Router has detected harmful data trying to access your

LAN.

 The NAT table is full.

Resolution:

 Reboot the Broadband Router by turning the power to the unit off and

then on again. Some types of hacker tools use very non-standard data