User's Manual

12
Power
Power status of the WX-2211. A steady LED indicates that the
power is on. No LED light indicates lack of power.
WLAN
Wireless Connection status. The WLAN LED will be ON
indicating any wireless connection on the Local Network.
WAN
Wide Area Network status. When connected to the Internet,
the WAN LED should be on.
LAN
Local Area Network status. A steady LED indicates a
connection to the wired local network. A flickering LED
indicates data transmission.
STAT
System status indicator. A flickering light indicates proper
operation.
Rear Panel
The rear panel features a LAN port, WAN port, Serial port and Factory
Reset button. Refer to the following table for the meaning of each feature.
Serial
Port used to connect an external analog backup modem.
LAN
The RJ-45 Ethernet port used to connect your hub/switch using
Ethernet cables to your WX-2211.
WAN
The RJ-45 Ethernet port labeled WAN is used to connect your
WX-2211 to your DSL or Cable modem.
Reset
Resets the configuration to default settings.