User's Manual

Safety Precautions
Safety Precautions
Read these instructions carefully before you install, operate, or transport the unit.
Installation and Operation
 The unit and it's accessories are designed for indoor use only!
 Install the unit on a flat and clean surface.
 Install the unit at a location where the ambient temperature stays lower
than 45°C.
 Install the unit near the power outlet and keep cables (power cable,
HDMI cable, etc. away from foot traffic).
 Install the device at a location where there is sufficient air circulation.
 Ensure that the correct power range is being used before powering on
the device.
 DO NOT disassemble the device. Please contact technical support if
you think the device is faulty.
 If the device is not going to be used for a long period of time,
disconnect it from the mains to avoid transient over-voltage.