User Manual

............................................................................................................................................................................................................................................................
WiFi SettingWiFi Setup
6-2
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
............................................................................................................................................................................................................................................................
Figure 6-1 WiFi Setting window
Table 6-1 describes the fields of the WiFi Setting window.
Table 6-1 Field descriptions
Field Description
Common
WiFi To configure the wireless LAN settings, click
the drop-down menu and select Enable. Select
Disable to end the wireless LAN.
TxPower Enter a percentage to set the parameter of your
transmission power consumption.
Radio Mode Click the drop-down menu and select either
b/g, b, or g for the wireless mode.
Auto Channel Select Click the drop-down menu and select On to
have the wireless access point automatically
select the channel with the least interference.
Select Off to configure manually.
Channel If the auto channel select is off, you can
manually select the wireless access point. The
default is 6.
Beacon Period Enter a beacon period in ms to determine the
frequency of the beacon to keep the network
synchronized. This is optional.