User Manual

............................................................................................................................................................................................................................................................
WAN Settin gNetwork
5-6
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
............................................................................................................................................................................................................................................................
Table 5-3 Field descriptions
Fields Description
[PPPoE#1] to [PPPoE#2] Enable one or both of the supported VLAN over
PPPoE.
VLAN
Untagged Enable if a VLAN ID is not being used.
Always Use ID Enable if a VLAN ID is being used and enter the ID
number (between 2 to 4094).
Priority Enter a priority level from 0 to 7 to define user
priority.
User Name Enter the user name for the PPPoE connection.
Password Enter the password for the PPPoE connection.
Access Concentrator The access concentrator is optional. Consult with
your ISP for information.
Service Name The service name is optional. Consult with your ISP
for information.
Mode
Connect on demand: Max idle time Select to have the router connect to the Internet only
when you choose to do so. Enter a max idle time to
specify the maximum number of idle seconds after
which the connection is dropped.
Always on Select to always have the router connect to the
Internet.
Manual Select and then click Connect to manually connect
the router to the internet. Click Disconnect to end
the connection.
Options
Authentication Mode Select the authentication mode from the drop-down
menu. Options include:
• CHAP + PAP
• CHAP
• PAP
This is optional. Your ISP will provide this
information if it is necessary.
MTU (bytes) Enable Auto to set the maximum transfer unit to
the default (1492), or enable Manual to manually
enter a unit.
Apply Changes Click to save your changes.