User Manual

WAN SettingNetwork
............................................................................................................................................................................................................................................................
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
5-3
............................................................................................................................................................................................................................................................
WAN Setting
The WAN settings include the configuration for both the Bridge Mode and Routed Mode.
Select WAN Setting in the Network menu to access the WAN setting window. You can
configure the WAN in Bridged Mode (see Figure 5-2) or Routed Mode (see Figure 5-3).
Bridged Mode
When bridge mode is selected, the basic functions of the router, such as the firewall, route
setting, DHCP server, DDNS, QoS, and UPnP, are disabled.
Select the Bridged Mode option from the WAN>Hybrid setting window to enable the
Bridged Mode WAN setting; see Figure 5-2.
Static Lease The set MAC associations and IP addresses. Assign
the static IP lease to the designated client's adaptor.
Not Assign IP The client's MAC address to be filtered from the
DHCP lease.
Apply Changes Click to save your changes.
Field Description