User Manual

Description of LEDs and interfacesProduct overview
............................................................................................................................................................................................................................................................
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
1-3
............................................................................................................................................................................................................................................................
Description of LEDs and interfaces
Figure 1-1 Front panel
Table 1-1 Front panel LEDs
LED Status Description
WPS (push-
button)
N/A If the WPS LED is off, press the push-button to turn on the
WPS. If the WPS LED is on, press the push-button once to
turn off the WPS.
WLAN (push-
button)
N/A If the WLAN LED is off, press the push-button to turn on
the WLAN. If the WLAN LED is on, press the push-
button once to turn off the WLAN.
Power On CellPipe 7130 RG is powered on.
Off Power is disconnected or there is a power failure.
Lan 1 to 4
On Ethernet LAN port 1 to 4 is connected and active.
Flashing Ethernet LAN port 1 to 4 has data traffic.
Off Ethernet LAN port 1 to 4 is not active.
WPS On WPS is enabled.
Off WPS is disabled.
WLAN On Wireless function is enabled.
Off Wireless function is disabled.
Phone 1 to 2 On Phone 1 to 2 is connected.
Off No phones are connected.
VDSL Link On VDSL is operating.
Slow flashing
*
VDSL is training.
Off VDSL is disconnected.
VDSL Data Slow flashing VDSL is enabled.
Fast flashing
†
VDSL is transmitting data.
Off VDSL is disabled.