® CellPipe 7130 Residential Gateway 6Ve.A2130, 6Ve.
Alcatel, Lucent, Alcatel-Lucent, the Alcatel-Lucent logo, and CellPipe are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
About this document Purpose This document provides information on the hardware setup, software configuration, and administration necessary to operate the CellPipe 7130 Residential Gateway 6Ve.A2130 and 6Ve.B2130. Reason for revision The following table shows the revision history of this document. Revision Date Reason for reissue Edition 01 April 2009 First release of this document Intended audience This document is intended for users and administrators of the CellPipe 7130 RG 6Ve.A2130 and 6Ve.
About this document ............................................................................................................................................................................................................................................................ Appearance Description input text Command names and text that the user types or selects as input to a system. output text Text that a system displays or prints. ! Press the Return or Enter key on the keyboard.
About this document ............................................................................................................................................................................................................................................................ Signal words The following table defines signal words that identify the hazard severity levels.
About this document ............................................................................................................................................................................................................................................................ ..............................................................................................................................................................................................................................................
Contents 1 Product overview Hardware introduction ............................................................................................................................... 1-1 Safety precautions ..................................................................................................................................... 1-2 Prerequisites ..............................................................................................................................................
Contents ............................................................................................................................................................................................................................................................ URL Filter ............................................................................................................................................... 7-11 8 Advanced Setup Route Setting .........................................................
1 Product overview Overview Purpose This chapter provides an introduction to the physical aspects of the CellPipe 7130 RG 6Ve.A2130 and 6Ve.B2130, including safety precautions, prerequisites, and descriptions. The CellPipe 7130 RG 6Ve.A2130 and 6Ve.B2130 will be referred to as CellPipe 7130 RG throughout the rest of this document.
Product overview Safety precautions ............................................................................................................................................................................................................................................................ Safety precautions Follow these recommendations to protect yourself and the CellPipe 7130 RG from harm: • Use volume labels to mark the type of power. • Use the power adapter provided with the CellPipe 7130 RG.
Product overview Description of LEDs and interfaces ............................................................................................................................................................................................................................................................ Description of LEDs and interfaces Figure 1-1 Front panel Table 1-1 Front panel LEDs LED Status Description WPS (pushbutton) N/A If the WPS LED is off, press the push-button to turn on the WPS.
Product overview Description of LEDs and interfaces ............................................................................................................................................................................................................................................................ LED Status Description VDSL Diag On Diagnostics is running. Flashing The CellPipe 7130 RG failed diagnostic when booting or resetting.
2 Hardware installation Overview Purpose This chapter provides the instructions to install the CellPipe 7130 RG hardware.
Hardware installation To install the CellPipe 7130 RG ............................................................................................................................................................................................................................................................ Figure 2-1 Cable connections Procedure 1. Connect the power adapter jack into the power socket on the CellPipe 7130 RG and plug the power adapter plug into an outlet. 2.
3 Accessing the CellPipe 7130 RG web configuration tool Overview Purpose This chapter explains how to access the CellPipe 7130 RG web configuration tool by entering the IP address and the default passwords. The management interface software is HTML-based and can be accessed using a web browser.
Accessing the CellPipe 7130 RG web configuration tool To access the CellPipe 7130 RG web configuration tool ............................................................................................................................................................................................................................................................
Accessing the CellPipe 7130 RG web configuration tool To access the CellPipe 7130 RG web configuration tool ............................................................................................................................................................................................................................................................ Figure 3-2 Status window The status window is described in Chapter 4, “Status”.
Accessing the CellPipe 7130 RG web configuration tool To access the CellPipe 7130 RG web configuration tool ............................................................................................................................................................................................................................................................ ....................................................................................................................................................
4 Status Overview Purpose This chapter describes the contents of the Status menu, which contains the status information for the CellPipe 7130 RG, its connections, and the connected hardware. Click the Status drop-down menu to open the Status menu.
Status System Info ............................................................................................................................................................................................................................................................ Figure 4-1 System Info window Table 4-1 describes the fields of the System Info window. Table 4-1 Field descriptions Field Description Version Info Model Name The model name of the modem.
Status Device Table ............................................................................................................................................................................................................................................................ Field Description WAN DNS2 The secondary DNS for the WAN connection. WAN MAC The MAC address of the WAN connections. Account Status 1 to 10 Number: The status (Enabled or Disabled) of accounts 1 to 10.
Status VDSL ............................................................................................................................................................................................................................................................ Figure 4-2 Device Table Table 4-2 describes the fields of the Device Table. Table 4-2 Field descriptions Field Description Host Name The name of the device connected to the gateway. IP Address The IP address of the client device.
Status VDSL ............................................................................................................................................................................................................................................................ Figure 4-3 VDSL window Table 4-3 describes the fields of the VDSL window. Table 4-3 Field descriptions Field Description VDSL2 Firmware Version The version of firmware in use. VDSL2 Link Status The status of VDSL2 link.
Status DHCP Lease Table ............................................................................................................................................................................................................................................................ Field Description G.Hs Estimated Near End Loop Length The estimated G.handshake (ITU G.994.1) near end loop length. G.Hs Estimated Far End Loop Length The estimated G.handshake far end loop length.
Status WiFi Associate Table ............................................................................................................................................................................................................................................................ WiFi Associate Table The WiFi Associate Table displays the connected clients. Select WiFi Associate Table in the Status menu to access the WiFi Associate Table; see Figure 4-5.
Status Statistics ............................................................................................................................................................................................................................................................ Statistics The Statistics window displays the number of bytes that have been received and transmitted by the LAN and WAN interfaces. Select Statistics in the Status menu to access the Statistics window; see Figure 4-6.
Status Statistics ............................................................................................................................................................................................................................................................ Field Description TX Collisions The number of packets collided when transmitted. .........................................................................................................................................................
Status Statistics ............................................................................................................................................................................................................................................................ ..............................................................................................................................................................................................................................................
5 Network Overview Purpose This chapter explains how to configure the network settings for the CellPipe 7130 RG from the Network menu. Click the Network drop-down menu to open the Network menu. Contents This chapter covers the following topics: LAN Setting 5-1 WAN Setting 5-3 LAN Setting The LAN Settings include the IP address, subnet mask, DHCP settings, DHCP relay, and static IP lease. Select LAN Setting in the Network menu to access the LAN Setting window; see Figure 5-1. .......................
Network LAN Setting ............................................................................................................................................................................................................................................................ Figure 5-1 LAN Setting window Table 5-1 describes the fields of the LAN Setting window. Table 5-1 Field descriptions Field Description IP Address The IP address of the LAN interface in dotted decimal notation. The default is 192.
Network WAN Setting ............................................................................................................................................................................................................................................................ Field Description Static Lease The set MAC associations and IP addresses. Assign the static IP lease to the designated client's adaptor. Not Assign IP The client's MAC address to be filtered from the DHCP lease.
Network WAN Setting ............................................................................................................................................................................................................................................................ Figure 5-2 Bridged mode WAN settings window Table 5-2 describes the fields of the Bridged Mode WAN setting window.
Network WAN Setting ............................................................................................................................................................................................................................................................ Routed Mode If the Routed Mode option is selected the CellPipe 7130 RG uses IP addresses and subnet masks. The functions of the router such as the Firewall, Route, DHCP Server, DDNS, and UPnP can be enabled.
Network WAN Setting ............................................................................................................................................................................................................................................................ Table 5-3 Field descriptions Fields Description [PPPoE#1] to [PPPoE#2] Enable one or both of the supported VLAN over PPPoE. VLAN Untagged Enable if a VLAN ID is not being used.
6 WiFi Setup Overview Purpose This chapter explains how to configure the WiFi settings for the CellPipe 7130 RG from the WiFi setup menu. Click the WiFi Setup drop-down menu to open the WiFi Setup menu. Contents This chapter covers the following topics: WiFi Setting 6-1 WiFi Security 6-3 WiFi Access 6-5 WiFi Setting The WiFi Setting window enables you to configure the common wireless and WiFi 1 settings.
WiFi Setup WiFi Setting ............................................................................................................................................................................................................................................................ Figure 6-1 WiFi Setting window Table 6-1 describes the fields of the WiFi Setting window.
WiFi Setup WiFi Security ............................................................................................................................................................................................................................................................ Field Description DTIM Period Enter a value to set the delivery traffic indication message. The DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages.
WiFi Setup WiFi Security ............................................................................................................................................................................................................................................................ Figure 6-2 WiFi Security window Table 6-2 describes the fields of the WiFi Security settings window.
WiFi Setup WiFi Access ............................................................................................................................................................................................................................................................ Field Description WEP Passphrase Key Select a level of encryption (64 bits or 128 bits). Enter a passphrase key consisting of 8 to 63 alphanumeric characters and click Generate. Key 1 to 4 Select either Key1, Key2, Key3, Key4.
WiFi Setup WiFi Access ............................................................................................................................................................................................................................................................ Figure 6-3 WiFi Access window Table 6-3 describes the fields of the WiFi Access window.
