User Manual

FilterFirewall Setup
............................................................................................................................................................................................................................................................
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
7-9
............................................................................................................................................................................................................................................................
Figure 7-6 Filter window
Table 7-6 describes the fields of the Filter window.
Table 7-6 Field descriptions
Field Description
Application Enter the name of the application to be filtered.
IP Type Select Dest (destination) or Source depending on
the how the rule has been defined.
IP Enter the IP address of the host you are blocking
from the application.
Netmask Select the Netmask of the host you are blocking
from the application.
Protocol Select one of the following:
• TCP
• UDP
• Both
The type of application determines what protocol is
required.
Port Type Select Dest (destination) or Source depending on
the type of application.
Starting Port Enter the starting port number of the application.
Ending Port Enter the ending port number of the application.