User Manual

QoS ALGQoS Setup
............................................................................................................................................................................................................................................................
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
9-5
............................................................................................................................................................................................................................................................
Figure 9-3 QoS ALG window
Table 9-3 describes the fields of the QoS ALG window.
Table 9-3 Field descriptions
Field Description
SIP ALG QoS Enable Select Enable to turn on the SIP and ALG QoS. Select
Disable to turn off the SIP and ALG QoS.
Original Tos Tag (First 3 bits of
DSCP)
Enable Original Tos Tag (type of service) to assign the
queue according to the incoming Tos value.
Specified Queue Enable Specified Queue and enter a queue number (0
to 7) to assign to the incoming traffic.
Keep Original Tos Enable Keep Original Tos to retain the original value.
New Tos Value Enable New Tos Value and enter a queue number (0 to
7) to assign to the incoming traffic.
New DSCP Value Enable New DSCP Value and enter a DSCP value (0 to
63).
Set Cos Select Enable to apply the set CoS (class of service).
Select Disable to turn off the set CoS.
Tos Enable To s to assign the queue according to the
incoming traffic.
User Specify Enable User Specify and enter a queue number (0 to 7)
to assign to the incoming traffic.