User Manual

QoS IP PolicyQoS Setup
............................................................................................................................................................................................................................................................
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
9-3
............................................................................................................................................................................................................................................................
Figure 9-2 QoS IP Policy window
Table 9-2 describes the fields of the QoS IP Policy window.
Table 9-2 Field descriptions
Field Description
IP Enter the IP address of the source host and the
destination host.
Subnet Mask Select the subnet mask of the source host and the
destination host.
Start Port Enter the start port of the source host and the destination
host.
End Port Enter the end port of the source host and the destination
host.
Protocol Select the necessary protocol:
• TCP
• UDP
Original Tos Tag (First 3 bits of
DSCP)
Enable Original Tos Tag (type of service) to assign the
queue according to the incoming Tos value.
Specified Queue Enable Specified Queue and enter a queue number (0
to 7) to assign to the incoming traffic.
Keep Original Tos Enable Keep Original Tos to retain the original value.