User Manual

............................................................................................................................................................................................................................................................
QoS IP PolicyQoS Setup
9-2
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
............................................................................................................................................................................................................................................................
Figure 9-1 QoS Scheduler window
Table 9-1 describes the fields of the QoS Scheduler window.
Table 9-1 Field descriptions
QoS IP Policy
The QoS IP Policy window enables you to group upstream traffic into data flows
according to the source address, destination address, source port, and destination port.
Select
QoS IP Policy in the QoS Setup menu to access the QoS IP Policy window; see
Figure 9-2.
Field Description
QoS Enable Select Enable to activate the QoS scheduler. Select
Disable to turn off the QoS scheduler.
Scheduler Type The QoS scheduler type is set to Priority Q. Priority
Q scheduling delivers high priority traffic first and
lower priority traffic when the queue is empty.
Upstream Bandwidth Enter an upstream bandwidth value from 100 to
50000 kb/s.
Apply Changes Click to save your changes.