User Manual

............................................................................................................................................................................................................................................................
Port Range ForwardingFirewall Setup
7-2
3FE-63398-AAAA-TCZZA
Edition 01 April 2009
............................................................................................................................................................................................................................................................
Figure 7-1 Port Range Forwarding window
Table 7-1 describes the fields of the Port Range Forwarding window.
Table 7-1 Field descriptions
Field Description
Application Enter the name of an application you are hosting on
your LAN PC; for example, Real Audio.
Start Port Enter the starting number of the port range used for
the application.
End Port Enter the ending number of the port range used for
the application.
Protocol Select one of:
• TCP
• UDP
• Both
The type of application determines what protocol is
required.
IP Address Enter the IP address of the LAN PC that is running
the application.
Enable Select Enable to allow port forwarding for the
application. Select Disable to stop port forwarding
for the application.