User Manual
Table Of Contents
- index.html
- features.html
- install.html
- pci-install.html
- pc-install.html
- connection.html
- utility.html
- utilityintro.html
- troubleshooting.html
- trouble1.html
- trouble2.html
- trouble4.html
- trouble5.html
- trouble7.htm
- trouble9.html
- trouble11.html
- trouble16.html
- trouble17.htm
- trouble18.html
- trouble20.html
- trouble21.html
- trouble22.html
- warranty.html
- support.html
- faq.html
- regulatory.html
- copyright.html
Wireless Nd1 PC Card and PCI Adapter
Wireless Nd1 PC Card, Wireless Nd1
PCI Adapter: User Guide
● Home
● Installation
● Configuration
● Help
Troubleshooting Ping Procedure
If at any time during the ping procedure you do not receive a return message for a successful ping, this means
that the address you are pinging has been changed and is causing a conflict or is no longer available. Check the
address in the configuration pages and make any necessary corrections using the console mode. After you have
made the corrections, continue with the ping procedure.
1. Click Windows Start > Run.
2. In the Run dialog box, type cmd and click OK.
3. Type ipconfig /all and press ENTER.
This displays IP configuration, including values like the following:
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1 (This is the Default Gateway of your LAN)
DNS Server: 192.168.2.1
If you do not see information for the Ethernet adapter connection information, your computer is not
communicating with your Ethernet adapter.
If you receive a message that your media is disconnected, your computer is communicating with your
adapter but has not received an IP address from your router. Verify that your wireless security settings for
your adapter match the wireless security settings on your router.
file:///G|/CSO/Documentation/Documentation%20-%20Dr...h-1%20PCI%20Card/User%20Guide/english/trouble17.htm (1 of 2)10/19/2006 12:14:36 PM