User Manual

Wireless Nd1 Router User Guide

and follow the prompts.

Possible Solution:

Verify that you are using the same SSID, Channel, and Security information as the

wireless router or access point. Perform the following steps to verify and, if necessary,

update the settings:

1. Right-click the Utility icon in the system tray and select Open Utility.

2. On the Wireless Networks tab, pull down the Add menu and select Use Wizard.

Browse through the list of available wireless network devices and locate the

correct wireless router or access point. If you do not see the correct device, click

Refresh to update the list. Double-click the device. If the correct device still does

not appear, click Manually connect to an advanced network and enter the

appropriate information to create the entry. For more information about setting

up connection profiles and security features, right click the USRobotics Nd1

Configuration Utility icon and select Help Files.

3. When the Properties window appears, verify and, if necessary, update the

appropriate connection and security information for the wireless network device.

Make sure you do not have the checkbox next to This is a computer-to-computer

(ad hoc) network selected. When you are finished, click OK.

4. On the main screen, click Apply and a connection will be established.

Possible Solution:

Change the channel used by the wireless router or access point and check for the

network on the Wireless Networks tab.

Possible Solution:

Verify that MAC address filtering is not enabled on your wireless router or access point.

If MAC address filtering is enabled, the MAC address of the Wireless Nd

PCI Adapter or

PC Card must be included in the filtering table of the wireless router or access point.

file:///G|/CSO/Documentation/Documentation%20-%20Dra...ch-1%20PCI%20Card/User%20Guide/english/trouble9.html (2 of 3)10/19/2006 12:14:35 PM