User Manual

Wireless Nd1 PC Card and PCI Adapter
2. Verify the wired or wireless connection to your router. If your computer cannot
communicate with the router, it cannot access the Internet.
3. Verify that your router is working. Refer to your router's documentation for
additional information.
4. If your router is working, verify that your router is connected connection to your
Cable or DSL modem. Your router must be connected to your modem and
communicating with it.
5. Verify your modem's connection to the Internet. Internet service through your
Internet service provider must be available.
Verify the Wireless connection to your router
1. Use the USRobotics Nd
1
Configuration Utility to check the connection between
your PC Card or PCI Adapter and your router.
2. Ensure that your computer is connected to your router rather than another
router, such as a neighbor's router. You can use the
USRobotics Nd
1
Configuration Utility to check the Network name (SSID) of the router that your
PC Card or PCI Adapter is connected to. If it is connected to the wrong router,
you can use the utility to force your PC Card or PCI Adapter to try to connect to
your router. Refer to
Connect to a Wireless Router or Access Point After
Installation.
If you do not have a connection to your router:
file:///G|/CSO/Documentation/Documentation%20-%20Dra...ch-1%20PCI%20Card/User%20Guide/english/trouble2.html (2 of 4)10/19/2006 12:14:34 PM