User's Manual Wireless Display Media Player SB-06WC
Index Declaration of conformity ····················································································English1 Safety Precautions and Maintenance ·································································English5 Information ··········································································································English6 Accessory · ··········································································································English7 Part Names ·············
Declaration of conformity FCC statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Industry of Canada statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
CE statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN 60950-1:2006+A11:2009+A1:2010+A12:2011 - EN62311 : 2008 - EN 300 328 V1.8.1: 2012 - EN 301 893 V1.7.1: 2012 - EN 301 489-1 V1.9.2: 2011 - EN 301 489-17 V2.2.
Nederlands [Dutch] Hierbij verklaart NEC Display Solutions, Ltd. dat het toestel Wireless Display Media Player (Model:SB-06WC) in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, NEC Display Solutions, Ltd., jiddikjara li dan Wireless Display Media Player (Model:SB-06WC) jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Safety Precautions and Maintenance For optimum performance, please note the following when setting up and using the Wireless Display Media Player. Please adhere to the precautions stated in the user’s manual of the projector or display to be connected to this product. In the event of a fault occurring, pull out the power plug of the display or projector immediately! If not, this may result in fire or electric shock. Pull out the power plug from the electrical outlet immediately.
Information Corresponding regions, corresponding countries of Wireless LAN Unit Please refer to our company website for the list of regions and countries where the use of the product is supported. Please duly note that use of the product in a region or country which does not support its use may contravene the laws on electromagnetic transmissions in that country. URL: http://www.nec-display.com/ap/en_projector/others/wlan.
Accessory The following accessories are enclosed with the product at the time of purchase.
Please contact your dealer if you find any of the accessories missing or damaged.
Part Names SB-06WC Main unit 1 LAN Port (RJ-45) This is used when functions are expanded in future. 4 Indicator Displays the status of the product. When using the Intel® WiDi function: •Lights up in green: Intel® WiDi connection in progress (communication in progress) •Flashes in green: Intel® WiDi connection preparation in progress •Lights up in orange: Intel® WiDi standby for connection (connection preparation completed) 2 Reset button This resets the product.
Connections Insert the enclosed wireless LAN unit or a commercially-available USB memory or SD memory card into the product.
• Insert the wireless LAN unit into the product first before turning on the power supply. • Insert the SD memory card into the slot for the SD memory card so that the label faces the top of the product.
• Please refer to the paragraph on “Specifications” for the specifications of the USB memory, SD memory card that can be used.
Installation Attach this product to the display main unit or projector main unit. Depending on the display, an optional slot board conversion adapter SB-02AM may be required. Refer to the start guide of the SB02AM on how to install the SB-02AM.
Check with your dealer for the compatible displays and projectors that can be used. CAUTION: • During installation, do not leave any foreign objects inside the display or projector. Do not drop the product, screws and optional slot cover as well. 1.
Installation of protector for wireless LAN unit 1. Remove the screws for securing the protector at the top of the USB Port where the wireless LAN unit is going to be connected. NOTE: • The wireless LAN unit can be inserted into either USB Port 1 or USB Port 2. CAUTION: • Do not lose the removed screws. Do not leave them inside the device as well. 2. Insert the wireless LAN unit to the USB Port. 3. Attach the protector for the wireless LAN unit.
Installation of protector for SD memory card 1. Remove the screws for securing the protector at the top of the slot for the SD memory card. CAUTION: • Do not lose the removed screws. Do not leave them inside the device as well. 2. Insert the SD memory card into the slot for the SD memory card. 3. Attach the protector for the SD memory card. At this point, fit the two studs on the protector into the square holes on the front panel of the product. 4. Securely fasten the protector with the screws.
Installation of adapter for wireless LAN unit Depending on the model of the display, when an external speaker is fitted, the wireless LAN unit may interfere with the external speaker, making direct connection to the product impossible. In this case, use an adapter for the wireless LAN unit (hereinafter “adapter”) and a USB extension cable to install the wireless LAN unit to the back of the display etc. 1.
Basic Operation Preparations For displays •Remote control enclosed with the display For projectors •Remote control enclosed with the projector •Dedicated remote control for operating the product Display remote control 1 POWER ON button Turn on the power of the display. 2 STANDBY button Turn off the power of the display. 3 SWITCH INPUT button (OPTION) Switch the video input of the display to the product. 4 SWITCH AUDIO INPUT button (AUDIO INPUT) Switch the audio input of the display.
Dedicated remote control for the projector (1) NUMBER button, PLAY button Used for the input of numbers. When playing contents with the media player, the functions are as follows. 1: Back, 2: Playback, 3: Skip, 5: Stop, 6: Pause. POWER ON STANDBY (2) MENU button Used for the menu operations of the product. (3) UP button ( ) Move to the setting at the top of the menu screen. (4) DOWN button ( ) Move to the setting at the bottom of the menu screen.
Operations and settings of the display and projector For displays (1) Connect the power cable to the display first before connecting to the electrical outlet.
(2) Turn on the main power of the display.
(3) The video input of the display changes to the product upon pressing the OPTION button on the remote control of the display.
(4) The audio input changes upon pressing the AUDIO INPUT button on the remote control of the display. Set the input to “OPTION” to select the audio of the product.
Function Controls 1. Wireless Display Video from a notebook computer that supports Intel® Wireless Display (hereinafter “Intel® WiDi”) can be received and displayed on a display or projected with a projector. Computer that supports Intel ® Wireless Display Projector or display which is connected to this product NOTE: • Refer to the user’s manual of the computer and the Intel website for details on the use and update of the Intel® WiDi software.
(3) Start up the Intel® WiDi software with the computer. (4) Operate the Intel® WiDi software to select “SB06WC” (name of the product when shipped from the factory) and then click [Connect]. NOTE: • For Windows 8.1, open the Charm bar and click “SB06WC” after selecting [Device] followed by [Project].
• Depending on the operating environment, the product “SB06WC” may not be detected. In that case, click [Scan (S)] to scan again.
2. Media Player 2-1. Overview Repeat the playback of video, still image and audio files stored in the same folder of the SD memory card or USB memory in the order of the character code of the filename. NOTE: • Multiple videos and still images can be selected but only one can be displayed at any one time.
• Contents from multiple folders cannot be selected at the same time.
• Create the folder in the root directory.
The playback image is as follows when “Audio” is selected in the audio selection settings. Playback time (sec.) 0 Display 10 20 Image-1.jpg Image-2.bmp Audio Audio-1.mp3 30 Movie.wmv 40 thereafter, playback will be repeated 以降、リピート再生 thereafter, playback will be repeated Audio-2.wav Starts playback The playback image is as follows when “Video” is selected in the audio selection settings. Playback time (sec.) 0 Display Audio 10 20 30 Image-1.jpg Image-2.bmp Movie.wmv 音声なし Movie.
2-4. Settings (1) Configure the respective settings for the auto play mode and manual play mode. How to display the setting menu of each play mode [In the case of auto play mode] (1) Select [Settings] - [Applications] - [Media Player] from the home screen.
(2) The setting screen for the auto play mode is displayed. [In the case of manual play mode] (1) Select [Media Player] from the home screen.
(2) Select [Manual Play Mode Settings] at the bottom left of the drive selection screen.
(4) Select the video and still image files to be displayed. (1) Use the / /-/+ buttons to align the focus on the file you want to select and press the SET button to select the file. Press the SET button again to cancel the selection. NOTE: • Upon being selected, a check mark will appear on that thumbnail.
• For video files, a movie mark will appear on that icon.
• The maximum number of files that can be displayed on the file selection screen at any one time is 15.
(6) Playback of contents • Select [Play] in the video, still image or audio selection screen to start the playback.
• Press the remote control buttons to perform the following actions during playback. 2/ (Play) 5/ (Stop) 6 / I I (Pause) 3/ 1/ I I (Skip) (Back) OPTION MENU EXIT : Start the playback of contents from the pause state.
: Stop the playback of contents and return to the menu screen.
: Stop playback and continue showing the displayed contents.
: Play the next contents.
3. Settings 3-1. Overview Display product information, configure various settings, format the media and so on.
Select [Settings] in the home screen to display the main screen of the setting menu. Password Setting • The setting menu can be protected by a password. Upon setting a password, a password entry screen will appear for you to enter the password when the setting menu is selected. Please remember your password as entry to the setting menu will be denied if the password is wrong.
3-2. About Displays the information of the SD memory card and USB memory connected to the product.
Select [Information] from the main screen of the setting menu. Item Displays Model Product name “SB-06WC” Serial Number. Serial no.
Lower bandwidth mode limit the bandwidth used for WiDi.
Default is “Disabled”. [Setting] GO channel list 1) Disabled : Set the mode to the low bandwidth mode.
2) Enabled : Do not set the mode to the low bandwidth mode. Set the Wi-Fi operating channels that the WiDi Enterprise Class Sink will use when it is a P2P group owner.
[Setting] "1"/"2"/"3"/"4"/"5"/"6"/"7"/"8"/"9"/"10"/"11"/"36"/"40"/"44"/"48" GO SSID suffix Set a suffix to be used in the creation of the P2P group SSID.
3-3-2. Media Player settings Configure the settings for the play mode and auto play mode of the media player.
Select [Application]–[Media Player] from the main screen of the setting menu for the setting screen. Item Settings Media Player mode Sets the playback mode of the media player. [Settings] 1) Manual (manual play mode) Start manual playback after selecting the contents.
Item Settings Display Time Set the time for displaying still images.
Use the number keys on the remote control to enter the time. [Settings] Selection range: 10-999 sec Setting unit: 1 sec [Setting Method] (1) Press the SET button after selecting this setting.
(2) Press the - (minus) button to clear the current setting time.
(3) Use the number buttons to enter the display time and then press the SET button. Transition type Specify the transition type.
Item Settings Content Aspect Set the display method for videos and still images. [Settings] 1) Full: Change the aspect ratio of the image to occupy the entire screen of the display.
2) Normal: Maintain the aspect ratio of the image.
3-4. General Configure the settings for the menu display language, date and time, startup mode and splash screen display.
Select [General] from the main screen of the setting menu for the setting screen. Item Settings Language Selects the language of the menu screen.
The default setting when shipped from the factory is “English”. [Settings] •English •German •French •Italian •Spanish •Swedish •Japanese Date Set the current date (Month/Day/Year).
3-5. System Security settings, media formatting, product firmware update and initialization of product settings etc. are performed.
Select [System] from the main screen of the setting menu for the setting screen. 3-5-1. Security Password for setting menu The [Settings] menu in the home screen can be protected by a password.
A 4-digit number is specified for the password.
No password is set when the product is first shipped from the factory.
3-5-2. Initialization Initialize the SD memory card or USB memory.
If a drive ID has been set, it will be written into the SD memory card or USB memory. [Operating Method] (1) After selecting [Drive], select [Done] at the bottom right of the screen and press the SET button.
(2) When the message “Initialize SD card?” or “Initialize USB memory?” appears, select [OK] and press the SET button. To cancel initialization, select [Cancel] and press the SET button.
4. Firmware Update Recovery If the firmware update fails, the product may not start up again. In this case, run firmware recovery.
Use the enclosed SD memory card for the recovery. [Operating Method] (1) Download the product firmware from the Company’s website. URL: http://www.nec-display.com/jp/support.html (2) Save the downloaded firmware file to the root directory of the SD memory card.
(3) Insert the above-mentioned SD memory card into the slot for the SD memory card on the product.
Troubleshooting General Audio cannot be heard from the display. [When the product is connected to a display] • Set the audio input of the display to “OPTION”. To do so, press the AUDIO INPUT button and set the selected audio input (AUDIO) shown at the top right of the screen to “OPTION”.
• Set the AUDIO setting in the display OPTION to DIGITAL. To do so, press the MENU button, select [ADVANCED OPTIONS] - [OPTION SETTING] and set [AUDIO] to [DIGITAL].
Media Player Function SD memory card or USB memory is not recognized. • Re-insert the SD memory card or USB memory.
• Check whether the file system of the SD memory card or USB memory is compatible with the product or not.
• The SD memory card or USB memory may be damaged. Check whether it can be recognized correctly on the computer. The files stored in the SD memory card or USB memory do not appear in the contents selection screen. • The contents may not be supported.
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS_ sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days.
Specifications Wireless Display Media Player SB-06WC USB port USB2.
Compatible formats of the media player (1) Video Type Video/Audio MPEG2, MP2/MP3 Video Audio VC-1/WMV9, WMA9 Video Audio H.264/AVC, AAC Video Audio Details Codec .mpg Maximum bit rate Up to 720 x 480: 20Mbps 1920 x 1080, 1280 x 720: 35Mbps .
(3) Audio Type MP3 LPCM Details Codec MPEG-1 Audio layer 3 MPEG-2 Audio layer 3 Bit rate MPEG-1: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) MPEG-2: 8, 16, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160 (kbps) *Support VBR Channel 2ch Sampling rate MPEG-1: 16bit/24bit: 32, 44.1, 48(kHz) MPEG-2: 16bit/24bit: 16/22.05/24(kHz) Codec Linear Pulse Code Modulation Bit rate 1411kbps Channel 2ch Sampling rate 16bit: 441kHz extension .mp3 English-39 .
