User's Manual

ManualsBrandsGemtek Technology ManualsElectronicsMotion Computing LE1600 with 11a/b/g WLAN

All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.

Data Sheet

December 200

Rev

1.4

Bluetooth 1.2 USB module

(

)

Introduction

The Bluetooth Class 2 Module (model number

BM-GP -CS-08) is a small module with 10-way

connector that provides a complete 2.4GHz

Bluetooth system. This ready-to-use Class2

Bluetooth module provides a fully compliant

Bluetooth system V1.2 for data and audio

communications.

This module also provides the coexistence

solution that is critical for Notebook

implementation. The coexistence solution

includes AFH, and WCS (Wireless

Coexistence Solution). Activity Signaling is an

option.

www.usi.com.tw

Feature

l Fully Qualified Bluetooth v1.2 system

l Enhanced Data Rate(EDR) compliant

with v0.9.

l Scatternet Support

l With small size suitable for compact

system integration. Low power

consumption, extend the battery life.

l 2.40 2 – 2.2480 GHz frequency band.

l Support for 802.11b/g Coexistence

including Intel WCS (Wireless

Coexistence System).

l Integrated Printed Antenna

l Easy for integration into mobile and

handheld device with flexible system

configuration and antenna design.

On board 8 Mbits flash memory for

firmware upgrade

Summary of content (11 pages)

PAGE 1
Bluetooth 1.2 USB module (BM-GP-CS-08) Data Sheet www.usi.com.tw December 2004 Rev 1.4 Introduction The Bluetooth Class 2 Module (model number BM-GP-CS-08) is a small module with 10-way connector that provides a complete 2.4GHz Bluetooth system. This ready-to-use Class2 Bluetooth module provides a fully compliant Bluetooth system V1.2 for data and audio communications. This module also provides the coexistence solution that is critical for Notebook implementation.
PAGE 2
Bluetooth USB Module (BM-GP-CS-08) General Description Features Description TM Standards Frequency Band Sensitivity Output Power Fully compliant with Bluetooth 1.2 Standard 2.402GHz ~ 2.480GHz -82 dBm 4 dBm max with power control (Maximum Power measurement is from chip set) Peak Gain @ 2.45GHz: 0.5dBi 10m ~20m (Varies depending on operating environment) Operating temperature: 0 °C to +70 °C Storage temperature: -40 °C to +85 °C 3.
PAGE 3
Bluetooth USB Module (BM-GP-CS-08) Block Diagram Figure 2: Module Block Diagram Electrical Characteristics Absolute Maximum Ratings Rating Storage Temperature Supply Voltage: VDD Min Max -40 °C -0.40V +85 °C +3.60V Recommended Operating Conditions Operating Condition Min Operating Temperature Range* 0 °C Supply Voltage: VDD +3.0V Max +70 °C +3.60V All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 4
Bluetooth USB Module (BM-GP-CS-08) Input/Output Terminal Characteristics Digital Terminals Input Voltage VIL input logic level low (VDD=3.0V) VIH input logic level high Output Voltage Min Typ Max Unit - +0.8 VDD+0.4 V V - 0.2 V - - V Min Typ Max Unit - - 0.3VDD V 0.7VDD - - V -1 2.5 1 - 5 10 µA pF 0 2.8 - 0.2 VDD V V -0.4 0.7VDD VOL output logic level low, (lO = 4.0mA), VDD=3.0V VOH output logic level high, (lO = -4.0mA), VDD-0.2 VDD=3.
PAGE 5
Bluetooth USB Module (BM-GP-CS-08) Radio Characteristics Radio Characteristics, VDD = 3.3V Temperature = +20°C Receiver Sensitivity at 0.1% BER Maximum received signal at 0.1% BER Transmitter RF transmit power Initial carrier frequency tolerance Frequency (GHz) Min Typ Max 2.402 2.441 2.480 2.402 2.441 2.480 0 0 0 -82 -84 -84 - -78 -80 -80 - Frequency (GHz) Min Typ Max 2.402 2.441 2.480 2.402 2.441 2.
PAGE 6
Bluetooth USB Module (BM-GP-CS-08) Radio Characteristics, C/I and Adjacent Channel Power VDD = 3.
PAGE 7
Bluetooth USB Module (BM-GP-CS-08) Mounting Guide for Antenna Radiation In order to achieve longest communication range, please keep the area surrounding antenna free of grounding or metal housing. All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 8
Bluetooth USB Module (BM-GP-CS-08) Impedance Matching of Antenna BM-GP-CS-08 utilizes a meander line printed antenna for radiate communication. Application environments, such as notebooks, PDAs, headsets or other handheld devices, both have plastic housings, different motherboards and other mechanism structures. These factors will cause the deviation of antenna resonant frequency. Therefore, impedance matching of antenna should be optimized for various applications to achieve longest communication range.
PAGE 9
Bluetooth USB Module (BM-GP-CS-08) Mechanical Drawing All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 10
Bluetooth USB Module (BM-GP-CS-08) Laser Marking Legend: 1. USI MMYY: MMYY is the date code. MM stands for month while YY stands for the last 2 digits of the year. 2. P/N: BM-GP-CS-08 is the the standard USI model number. This part number can be customize to your specific part number. 3. MAC: MAC address. All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 11
Bluetooth USB Module (BM-GP-CS-08) Packaging For Additional information, please contact the following: Universal Scientific Industrial Co., Ltd. Headquarters 141, Lane 351, Taiping Road, Sec. 1, Tsao-Tuen , Taiwan, Http://www.usi.com.tw Tel: + 886-49-2350876, 2325876 Fax: +886-49-3439561, 2337360, 2351093 E-mail:usi@ms.usi.com.tw All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.