User's Manual

■ chapter 4 upgrading your computer
Upgrading the Hard Disk Drive
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate and remove 2 Screw A’s on the Metal Cover.
Screw A x2
Metal Cover
4. Remove the Metal Cover.
5. Locate and remove 4 Screw B’s. Gently remove the HDD
module from the HDD cable connector.
4-3
Hard Drive Module
Remove HDD module
from connector
Screw B x2
Screw B x2