User's Manual

Ϯ chapter 5 trouble shooting
PC Card / PCMCIA Problems
Note:
Some system may not have the PC Card Slot option.
PC Cards do not function-
 Make sure you have properly installed the driver for the
card.
 Consult the card’s manual or contact the vendor for
trouble-shooting.
The PC card cannot be recognized -
 Windows NT4.0 does not support PCMCIA (PC Card)
function. You may need an external program for this.
 Make sure the card is fully inserted; the outer end of the
card should be even with the edge of the computer.
 Remove and insert the PC card again.
 Make sure there is no IRQ conflict with the card. See
Windows on-line help for solving IRQ conflicts.
 Reboot the computer and see if the problem persists.
 The card may be defective. Try the card on another
system, if possible.
Windows crashes or freezes when you remove the PC
card-
 Make sure you have <Stop> the PC card before
removing it. Double-click the Safely Remove Hardware icon at
the lower right corner of the task bar and select the card you
wish to stop. When you click <Close>, in few seconds Windows
will prompt you to remove the card.
5-14