User's Manual

Wizards
Using the Remote Access Wizard to Establish the IPSec VPN Tunnels or SSL VPN Tunnels for Remote
Access
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 59
2
Figure 1 IPSec Remote Access with a Cisco VPN Client Software or a Cisco
Device as a Cisco VPN Hardware Client
STEP 1 Click Wizards -> Remote Access.
The Getting Started window opens.
STEP 2 To establish the IPSec VPN tunnel for remote access, choose Cisco IPSec VPN as
the VPN tunnel type.
STEP 3 Click Begin.
The Group Setting window opens. From this page you can specify the Cisco
IPSec VPN server group policy:
• Group Name: Enter the name for the group policy.
• IKE Authentication Method: Specify the authentication method.
- Preshare Key: If you choose this option, enter the desired value that the
peer device must provide to establish a connection. The pre-shared key
must be entered exactly the same here and on the remote clients.
- Certificate: If you choose this option, choose a local certificate and a
remote certificate for authentication. On the remote clients, the selected
local certificate should be set as the remote certificate, and the selected
remote certificate should be set as the local certificate. If the certificate
is not in the list, go to the Device Management -> Certificate
Management page to import the certificates. See Managing the
Certificates for Authentication, page 310.
Inside
10.10.10.0
Outside
ISA500
as a Cisco IPSec VPN Server
DNS Server
10.10.10.163
WINS Server
10.10.10.133
Internet
Internal
network
Personal Computer
running Cisco VPN Client software
Personal Computer
running Cisco VPN Client software
Cisco Device
as a Cisco VPN hardware client