User's Manual

Wizards
Using the Site-to-Site Wizard to Establish the Site-to-Site VPN Tunnels
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 53
2
The Summary window opens. The Summary window displays the summary
information for all configurations you made.
STEP 8 Click Submit to save your settings and exit the Dual WAN Wizard.
Using the Site-to-Site Wizard to Establish the Site-to-Site VPN
Tunnels
Use the Site-to-Site Wizard to configure the site-to site VPN to provide a secure
connection between two routers that are physically separated over the IPSec VPN
tunnel. It includes the following sections:
• Using the Site-to-Site Wizard to Establish the Site-to-Site VPN tunnel,
page 53
• Configuring the IKE Policies, page 55
• Configuring the Transform Policies, page 57
NOTE Before you begin, you need to know the subnet address of your local and remote
networks, and import the digital certificates for authentication between the two
peers if needed.
Using the Site-to-Site Wizard to Establish the Site-to-Site VPN tunnel
STEP 1 Click Wizards -> Site-to-Site Wizard.
The Getting Started window opens.
STEP 2 Click Begin.
The VPN Peer Settings window opens. From this page you can specify the IPSec
VPN policy profile for establishing the IPSec VPN tunnel with a remote router.
Enter the following information:
• Profile Name: Enter the name for the IPSec VPN policy profile.
• The Interface for this VPN: Choose the WAN interface that the traffic
passes through over the IPSec VPN tunnel.