User's Manual

Device Management
Configuring the Time Zone
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 320
10
• Secondary RADIUS Server IP: Enter the IP address of the secondary
RADIUS server.
• Secondary RADIUS Server Port: Enter the port number on the secondary
RADIUS server that is used to send the RADIUS traffic. The default is 1812.
• Secondary RADIUS Server Pre-shared Key: Enter the pre-shared key that
is configured on the secondary RADIUS server.
STEP 4 Click OK to save your settings.
STEP 5 Repeat the above steps to edit the settings for other RADIUS groups if needed.
STEP 6 Click Save to apply your settings.
Configuring the Time Zone
Use the Time Zone / Clock Settings page to manually configure the time zone and
clock settings, or to dynamically synchronize the time zone and clock settings with
the Network Time Protocol (NTP) server.
STEP 1 Click Device Management -> TimeZone / Clock Settings.
The Time Zone and Clock Settings window opens.
STEP 2 Click Manual to manually set the date and time. Enter the values in the Date and
Time fields.
STEP 3 Click Dynamic to automatically synchronize the date and time with the NTP
server:
• Date/Time: Choose the time zone relative to Greenwich Mean Time (GMT).
• Automatically Adjust for Daylight Savings Time: Click On to automatically
adjust the time for Daylight Savings Time, or click Off to disable it.
• Use Default NTP Servers: Click this option to use the default Network Time
Protocol (NTP) server.