User's Manual

Networking
Service Management
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 154
4
Other options: To edit an entry, check the box and click Edit. To delete an entry,
check the box and click Delete. To delete multiple entries, check the boxes of
multiple entries and click Delete Group.
After you click Add or Edit, the Address Table - Add/Edit window opens.
STEP 3 Enter the name for the group address in the Group Name field.
STEP 4 To add the address objects to the group, select the address objects from the left
list and click the right arrow ->.
STEP 5 To remove the address objects from the group, select the address objects from
the right list and click the left arrow <-.
STEP 6 Click OK to save your settings.
STEP 7 Click Save to apply your settings.
Service Management
Use the Services page to maintain the service or group service objects. The
security appliance is configured with a long list of standard services so you can
use to configure the firewall access rules, port forwarding rules, or other features.
For more information, see Default Service Objects, page 360.
This section includes the following topics:
• Configuring the Services, page 154
• Configuring the Group Services, page 155
Configuring the Services
If you need to configure a feature for a custom service that is not in the standard
list, you must first define the service object.
STEP 1 Click Network -> Services.
The Services window opens. All existing service objects are listed in the Service
table.
STEP 2 In the Service Table area, click Add to add a new service.