User's Manual

Networking
Address Management
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 152
4
STEP 2 Choose the traffic forwarding queue to which the DSCP priority tag value is
mapped.
STEP 3 Click Save to apply your settings.
Address Management
Use the Address Object Management page to manage the address and group
address objects. The security appliance is configured with a long list of common
address objects so that you can use to configure the firewall access rules, port
forwarding rules, or other features. For more information, see Default Address
Objects, page 363.
This section includes the following topics:
• Configuring the Addresses, page 152
• Configuring the Group Addresses, page 153
Configuring the Addresses
STEP 1 Click Networking -> Address Object Management.
The Address Object Management window opens. All existing address objects are
listed in the Address table.
STEP 2 In the Address Table area, click Add to add a new address.
Other options: To edit an entry, check the box and click Edit. To delete an entry,
check the box and click Delete. To delete multiple entries, check the boxes of
multiple entries and click Delete Selection. The default address object cannot be
edited.
After you click Add or Edit, the Address Table - Add/Edit window opens.
STEP 3 Enter the following informaiton:
• Name: Enter the name for the address object.
• Type: Specify the address type and then enter the corresponding
information.