User's Manual

2. Right click on Local Area Connection and then select Properties.
3. Select Internet Protocol (TCP/IP) and then click on Properties.
4. Click on Use the following IP address.
5. Type in the following IP address: 10.0.0.10~100.
6. For the Subnet Mask, type: 255.0.0.0.
7. Click OK to close the TCP/IP properties panel.
8. Click OK to close the Network panel and the changes will take
effect when this panel is closed.
1. Open a web browser and type in the following address:
10.0.0.2.
2. A login screen should appear. Type the login name: admin and the password: admin.