User's Manual

- Win 2000: Click on Start, Settings, then Network and Dial-up
Connections.
- Win XP: Click on Start, Connect To, then Show All Connections.
2. Right click on Local Area Connection and then select Properties.
3. Select Internet Protocol (TCP/IP) and then click on Properties.
4. Select Obtain an IP Address Automatically and Obtain a DNS server
automatically.
5. Click OK to close the TCP/IP properties panel.
6. Click OK to close the Network panel.
The changes will take a few minutes.
Open a new web browser and type in the new IP address of WHAPC-100GE to
ensure the changes worked.
Other Features
Wireless Tab
- Change the value for the SSID ( Note: If you change the value here,
you will also need to change the value on each PC.)
- Change the Country where you are
- Change the Band