User's Manual

Upon you receive your wireless access point, please check that
the following contents are packaged:
- HomePlug Wireless Access Point (WHAPC-100GE)
- Quick Install Guide
Necessary Equipment?
- One or more computers with wireless device, and it's software already installed
- Microsoft TCP/IP networking protocol installed on each PC
- Web browser installed on each PC
Equipment that can be used with the WHAPC-100GE?
- Broadband modem
- ALL1681 Broadband router
- Additional PCs with a wireless or HomePlug Device
Important: After receiving the wireless access point, please check for
any shipping damages to the carton and camera before proceeding
with any installations.
PC or Laptop Setup Guide
Note: If you have not installed your Wireless device to your laptop
So far, please do so. For instructions on how to install your
Wireless device, please contact the manufacturer of that wireless
device.
To configure the Wireless device to work with your WHAPC-100GE,
please follow the following steps:
1. Plug WHAPC-100GE into an outlet.
2. Go to the wireless card's configuration screen or window. It
should resemble figure 1 or others.