User's Manual

GEMTEK HomePlug Wireless Access Point User Guide
Introduction
Important Safety Information
This product is intended for connection to the AC power. The following
precautions should be taken when using this product.
- Read all instructions before installing and operating this product.
- Follow all warnings and instructions marked on the product.
- Do not operate this product near water.
- This product relies on a building’s electrical installation for short-circuit
(over current) protection.
- Do not allow anything to rest on the product.
- The HomePlug Wireless Access Point should be plugged directly into an
The GEMTEK WHAPC-100GE Home Plug + Wireless
11g Access Point is like 2 devices in one box! The
Home-Plug Wireless AP functions lets you to securely
expand the range of your local area network, while
Home-Plug utilizes the electric cord as the transfer
media, the 11G utilizes the electric wave.
The GEMTEK WHAPC-100GE Home Plug + Wireless
11g Access Point offers a convenient way to create a
simple network through the existing power line of a home
or office with the additional ability to provide you with
access to your network without wires. Offering several
levels of security, the WHAPC-100GE is built with
128-bit WEP encryption and 802.11i (WPA / TKIP, AES,
PSK) for the wireless pass-through and 56-bit DES
encryption for the Power line pass-through There are
also some Enhanced Security Management Functions:
Wireless/Wired 802.1x, and Embedded RADIUS Server

Summary of content (12 pages)