User Manual

19
Computer
Status Indicator Light is Then...
Off
Flashing Green
Flashing Green
Flashing Red
This is normal if you used the “I have a network”
connection on page 9.
If your MicroCell is connected using the “I do not
have a network” connection on page 9 or the
Alternate Connection on page 17, check that
all cables are firmly connected.
A flashing green light is normal if your MicroCell
is connected using the “I do not have a
network” connection on page 9 or the Alternate
Connection on page 17. Your computer is
transferring data.
The MicroCell may be activating or downloading
new software.
During the activation process, it can take up
to 90 minutes for your MicroCell to complete
activation.
If the light is still flashing after 90 minutes, refer
to Step 5 on page 13.
There may be a problem with your device.
Contact AT&T Support at 1-800-331-0500
for assistance.
3G
ATT3GMicroCell_UserManual_1210.indd 19ATT3GMicroCell_UserManual_1210.indd 19 12/16/10 4:46 PM12/16/10 4:46 PM