User Manual

AT&T 3G MicroCell™ User Manual | Other
18
Status Indicator
Light is
Then...
Your MicroCell may need replacement.
Return it to the place of purchase.
A cable may be disconnected. Make sure that all
cables are firmly attached.
It is normal for this light to flash for up to
3 minutes. If flashing continues for more than
3 minutes, make sure your MicroCell is connected
correctly and that all cables are firmly attached.
Then, restart all devices.
The MicroCell is not receiving a GPS signal.
This is normal when connecting your MicroCell for
the first time.
If the light is off after a successful activation,
restart the MicroCell and wait until it acquires a
new GPS signal. You may need to wait up to
60 minutes to get a new signal.
If the light remains off after 60 minutes, contact
AT&T Support at 1-800-331-0500 for assistance.
If the light is still flashing 60 minutes after
connecting your MicroCell for the first time, your
MicroCell cannot receive a GPS signal. Refer to
Step 4 on page 12.
Red
Off
Flashing
Off
Flashing Green
Power
Ethernet
GPS
Decoding The Lights On Your 3G MicroCell
ATT3GMicroCell_UserManual_1210.indd 18ATT3GMicroCell_UserManual_1210.indd 18 12/16/10 4:46 PM12/16/10 4:46 PM