User Manual

Alternate Connection

STEP 1. Disconnect the existing Ethernet cable between your modem and

router from your modem.

STEP 2. Connect the existing Ethernet cable to the “Computer” port on your

MicroCell (the other end should still be connected to your router).

STEP 3. Connect the yellow Ethernet cable to the “Ethernet” port on your

MicroCell and the Ethernet port on your modem.

STEP 4. Wait up to 90 minutes for your 3G light to turn solid green.

Alternate Connection

(MicroCell is placed between your Router and Modem)

This Alternate Connection should be used if:

» You are unable to activate your MicroCell using the “I have a network” connection

on page 9.

» You are experiencing voice quality issues and are a heavy Internet bandwidth user.

NOTE: This connection can only be used if you have both a modem and router.

STEP 1

STEP 2

STEP 3

Modem

Router

ATT3GMicroCell_UserManual_1210.indd 17ATT3GMicroCell_UserManual_1210.indd 17 12/16/10 4:46 PM12/16/10 4:46 PM