User's Manual

Each wireless network has a unique name or SSID. Your three wireless networks have
default names which you can customize. If you change the name, consider using
something unique to make sure it is not the same as other wireless networks that your
router may detect in the area. Do not use personal information that can be visible to other
users in your area searching for wireless networks.
Security Type
Select from WPA2 Personal, WPA Personal, WEP 128bit, or WEP 64bit. See the Security
Mode Chart above for more information.
Security Key
Enter a new security key that users must enter to gain access to your wireless network. The
key must be between 8 and 63 characters.
Network Status
Check the box to keep that network available in your list of wireless networks or uncheck
it to disable it and remove it from the list of wireless networks.
WPS (Wi-Fi Protected Setup)
If you have a device that supports Wi-Fi Protected Setup there are three ways to connect
via WPS. Use the method that applies to the device you are configuring.
Push Button Method
Use this method if the device you are configuring has a WPS button.