User's Manual

Protocol: Select the protocol used for this application, either TCP or UDP.
To IP Address: For each application, enter the IP address of the computer that should
receive the requests.
On: For each application, select On to enable port forwarding.
Click MORE to add more applications.
PORT TRIGGERING
Port Triggering allows you to watch outgoing data for specific port numbers. Your router
remembers the IP address of the computer that sends the matching data, so when the
requested data returns through your router, the data is pulled back to the correct computer.
Click Save Changes to keep any changes you made to the router settings or click Cancel to
cancel your changes.
Application Name: Enter a unique name for the trigger (up to 12 characters).
Triggered Range: Enter the Start and End port numbers of the Triggered Range. Check
with the Internet application documentation for the port number(s) needed.
Forward Range: Enter the Start and End port numbers of the Forwarded Range. Check
with the Internet application documentation for the port number(s) needed.
On: For each application, select On to enable port triggering.
Click MORE to add more applications.