User's Manual

• To remove a client from the list, click Remove next to the client you want to
remove.
Start IP Address: Enter a value for the DHCP server to start with when issuing IP
addresses. Because your router’s default IP address is 192.168.1.1, the Starting IP
Address must be 192.168.1.2 or greater, but smaller than 192.168.1.253.
Maximum Number of Users: Enter the maximum number of computers that can be
assigned an IP address by the DHCP server. The default is 50 and cannot exceed 155.
IP Address Range: This displays the range based on the Start IP address and the Maximum
Number of Users selected.
Client Lease Time: This is the amount of time a network user will be allowed to be
connected to (or "lease") your router with their current dynamic IP address. Enter the
amount of time, in minutes, that the user will be connected to this dynamic IP address. The
default is 0 minutes, which means one day. When time expires, the user will be
automatically assigned a new dynamic IP address.
Static DNS 1-3: The Domain Name System (DNS) is how the Internet translates domain
or website names into Internet addresses or URLs. Contact your ISP to get at least one
DNS Server IP Address to enter in the spaces provided. You can enter up to two DNS
Server IP Addresses. Your router will use these for quicker access to functioning DNS
servers.
WINS: The Windows Internet Naming Service (WINS) manages each computer’s
interaction with the Internet. If you use a WINS server, enter that server’s IP Address
here. Otherwise, leave these spaces blank.
Firmware Version
Your router’s current firmware version is displayed here. To makes changes, click
Advanced. A new menu will be displayed showing the advanced options available for the
Firmware Version. Click Save Changes to keep any changes you made to the router
settings or click Cancel to cancel your changes.