User's Manual

Configuration
• Select Automatic Configuration – DHCP to have your router set the Internet
settings automatically (recommended).
• Select Static IP to manually enter settings if you are required to use a permanent IP
address to connect to the Internet. Select PPPoE if you use a DSL line that requires
PPPoE (check with your ISP). Enter the PPPoE user name and password.
Internet IP Address: This is your router’s IP address, as seen from the Internet. Contact
your ISP to get the IP Address to enter in the spaces provided.
Subnet Mask: This is your router’s Subnet Mask, as seen by other users on the Internet
(including your ISP). Do not change the Subnet Mask unless you have a specific reason to
do so. Contact your ISP to get the Subnet Mask to enter in the spaces provided.
Default Gateway: This is your ISP servers IP address. Contact your ISP to get the Gateway
Address to enter in the spaces provided.