User's Manual Part 1

Regulatory Compliance and Safety Information for Cisco 800 Series Routers

OL-10260-06

Translated Safety Warnings

• Statement 1071—Warning Definition

• Statement 19—TN Power Warning

• Statement 23—ISDN Connection Warning

• Statement 43—Jewelry Removal Warning

• Statement 94—Wrist Strap Warning

• Statement 119—Unit Short Circuit Protection

• Statement 150—Power Off Before Working on System

• Statement 151—ISDN Network Voltages Warning

• Statement 162—EU Public Network Port Warning

• Statement 199—Emergency Access Warning

• Statement 242—Equipment Grounding Warning

• Statement 332—Antenna Installation Warning

• Statement 353—This Product Must be Connected

• Statement 371—Power Cable and AC Adapter

• Statement 373—Must Connect To An Indoor Antenna

• Statement 378—Read Wall-Mounting Instructions Before Installation

• Statement 393—Explosive Device Proximity Wireless Network Device

• Statement 1004—Installation Instructions

• Statement 1005—Circuit Breaker

• Statement 1008—Class 1 Laser Product

• Statement 1010—Staring into Laser Beam

• Statement 1015—Battery Handling

• Statement 1016—Invisible Laser Radiation

• Statement 1021—SELV Circuit

• Statement 1023—No. 26 AWG

• Statement 1024—Ground Conductor

• Statement 1025—Use Copper Conductors Only

• Statement 1026—WAN Port Static Shock

• Statement 1028—More Than One Power Supply

• Statement 1030—Equipment Installation

• Statement 1031—EU Public Network Port

• Statement 1033—SELV-IEC 60950 DC Power Supply

• Statement 1035—Proximity to Water

• Statement 1036—Telephone Jacks in Wet Locations

• Statement 1037—Uninsulated Wires or Terminals

• Statement 1038—Telephone Use During an Electrical Storm

• Statement 1040—Product Disposal

• Statement 1042—Ring Signal Generator