User's Manual

WPI-100G PCI Adapter
Wireless Broadband Anywhere
5
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-HocMode, you’ll
see a screen similar to that shown in Figure 4-4. Select the correct operating channel for
your network from the Channel drop-down menu. Then, select the Network Mode from the
drop-down menu. Click the Next button, and go to Step 4. Click the Back button to change
any settings.
Channel - The channel you choose should match the channel set on the other devices in
your wireless network. If you are unsure about which channel to use, select the default
channel (Channel 6).
Figure 4-4
5. The Setup Wizard will ask you to review your settings (as in Figure 4-5) before it starts
to copy files. Click the Next button to save these settings, or click the Back button to
change any settings.
Figure 4-5
6. After the files have been successfully copied, the screen in Figure 4-6 will appear. Click
the Exit button.
Figure 4-6