User's Manual

WPI-100G PCI Adapter
Wireless Broadband Anywhere
4
Getting to Know the Wireless-G PCI Adapter
ACT LED Green. The ACT LED lights up when the Adapter is powered on.
Antenna Port Attach the PCI Adapter’s antenna here and position it for maximum
performance, which is usually perpendicular to the horizon.
Software Installation and Confituration for Window 98SE , Me ,
and 2000
1. To install the Adapter, click the Install button on the Welcome screen, Figure 4-1. Click
User Guide to view the User Guide or click Exit to exit the Setup Wizard.
2. After reading the License Agreement, shown in Figure 4-2, click the Next button to
continue the installation, or click the Cancel button to end the installation.
Figure 4-2
3. The Setup Wizard will display a screen similar to that shown in Figure 4-3, asking you
to choose a wireless mode. Click the Infrastructure Mode radio button if you want your
wireless computers to network with computers on your wired network using a wireless
access point. Click the Ad-HocMode radio button if you want multiple wireless computers
to network directly with each other. Do not use Ad-Hoc mode if you want your wireless
computers to communicate with computers on your wired network.
In the SSID field, enter the SSID of your wireless network. The SSID must be identical for
all devices in the network.
Figure 4-3