User Manual

11Mbps Wireless LAN PCI Card
Page 30 11Mbps Wireless LAN PCI Card User's Manual
For the Card under Windows 2000:
Please check the followings if you encounter some problem while installing the PCI card or your PCI
card is non-functional.
1. Check the Windows 2000 Diagnostics. You should find out whether there is any conflict
in the resource allocation or the I/O address, IRQ allocations. If you find that the IRQ or
I/O addresses are already assigned to some other devices, you must change that value.
I/O address needs 40h byte length.
2. Click on the Control panel. Double click on the PCI Card, you will see 11Mbps Wireless
LAN PCI Card. Double clicking on that will show you the Card Information, driver name
and the driver file. You must confirm the name of the driver and the driver file as "cw10"
and "cw10.sys". If you do not find the names as we listed before, there are some problems
and the driver is not installed properly. Reinstall the driver.
Note: Check the PnP BIOS setup menu and select no in case of the 11Mbps Wireless LAN
PCI Card installation.