User Manual

11Mbps Wireless LAN PCI Card
User's Manual 11Mbps Wireless LAN PCI Card Page 17
4.4. Installation Procedure for Windows 2000 / Windows ME
Please follow the following steps one by one in order to install the
11Mbps Wireless LAN PCI Card successfully.
1. Power on your computer and allow Windows 2000 / ME to load fully.
2. Be sure that there is no PCI Card inserted yet.
3. Insert the given Installation CD in the CD-ROM and then click on the Setup.
4. Accept the license agreement.
5. Select the SSID. Default ESSID is Default. You can change this later also using the configuration
utility or network configuration. Click on Next.
6. Select network mode and click on Next. Default is Infrastructure.
7. Give the path of the destination folder. To set the path of your choice click on Browse and then
click Next.
8. Setup will add program icon to the Program Folder. You may type a new folder name, or select one
from the existing Folder list.
9. It takes a few seconds for copying the utility files and then click on Finish.
10 Then insert 11Mbps Wireless LAN PCI Card into the slot, wizard will found new hardware
“11Mbps Wireless LAN PCI Card”, click on Next.
11 Choose “Search for a suitable driver for my device”, and then click on Next.
12 Select CD-ROM drives to locate driver files. And click on Next.
Note: Do not insert the PCI card until you are asked to do so, failure of which may result in unsuccessful installation o
f
your 11Mbps Wireless LAN PCI Card.