BC-4GMCPGa Quick Installation Guide
Getting to Know your Device 1. SIM card Slot Cover: Open the cover and insert SIM card into the slot with right direction. 2. Telephone Port (RJ-11): Connect your telephone to Dual-Band Modem with a RJ-11 telephone cable. 3. LAN Port (RJ-45): Port for connecting PC, hub and switch or other network equipment by RJ-45 Ethernet cable. 4. WPS Button: Press “WPS” button, so, router can easily connects to client which also support WPS function. 5.
Installation Please follow the steps below to install the device: Step1: Insert SIM card into the device with right direction. Step2: Insert the power cord into the DC-12V power jack; and insert the plug into power outlet. Step3: Power ON the device using the switch button. The device will start the booting process. After a few seconds, the LED lights will start blinking.
Easy Setup Please follow the steps below to configure your device through the web interface: Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the Dual-Band Modem : http://192.168.1.1 Step2: Enter Dual-Band Modem administrator login username/password to access the web management interface. The default username/password is admin/admin. Step3: The main page after login will display the default setting of SSID, Encryption, and Password.
Troubleshooting Tips If you are experiencing any issues with your device: Restart your device. Restore your device to its factory default settings. Contact Telefonica Network or visit the website http://www.telefonica.com.
Federal Communication Commission Interference Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
