User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 6 of 51
The P-720 can be remote managed by HTTPs, CLISH and SNMP.
z Web-based user interface based on HTTPs and CLISH configuration based on SSHv2 supplies
secure remote management
z NMS product supplies the system management solution
z DHCP Server/DHCP Relay service supplies flexibility for different network setup
z Remote software upgrading via HTTPs
Management Option
You can use the Access Point management systems through the following interfaces:
Web-browser interface
with HTTPS
Command Line interface (CLI) with optional SSH
Simple Network Management Protocol
P-720 management system pages are organized the same way for the web-browser interface and the
CLI. This user manual provides detailed description of each management option.
Features Highlight
Super AP
Multiple BSSID (up to 16)
SSID per BSSID
Enabled or Disabled Hidden SSID per BSSID
VLAN ID per BSSID
AAA way per BSSID, 802.1x and web login
Co-existence of 802.1x and web login
Security policy per BSSID
WPA pass-through
RADIUS server per BSSID
AAA
RADIUS client supporting
802.1x supporting(EAP/TLS,EAP/TTLS, EAP/PEAP and EAP/SIM)
Security
Static 64/128bits WEP, Dynamic 64/128bits WEP
WPA/TKIP and WPA/AES support
MAC ACL
Access Control (accept rule and deny rule) based on MAC address
Layer 2 Isolation
Hidden SSID
Management
Secure management via HTTPS, CLISH, SNMP
Standard MIB
Remote firmware update via WEB UI
Backup/Restore configuration file