User's Manual
Table Of Contents
P-720 User’s Guide v1.0 Jun 10, 2005
Page 41 of 51
System | Telnet
Use System | Telnet menu to manage the telnet/SSH service of your P-720.
Figure 50 – System Configuration settings
Telnet Service – Enable or disable telnet service of P-720
SSH Service – Enable or disable SSH service of P-720.
The default of these two services are all Enabled. The current IETF SSH (SSHv2) is supported for
security of accessing P-720 via telnet/CLISH.
System | Configuration
Use the System | Configuration menu to configure such system utilities:
Backup – download current working system configuration for backup
Upload/Restore – upload system configuration for restore
Figure 51 – System Configuration settings
You can save your current device configuration file locally using the Backup menu under the System
| Configuration | Backup menu:
Figure 52 – Backup settings
Such device configuration is saved in the specific format file (.cfg).
Description Message shows the current version of firmware.
Click the Preparation button to start saving the configuration file.
Click the Download button to download current working configuration into your local PC.