User's Manual

P-720 User’s Guide v1.0 Jun 10, 2005
Page 36 of 51
Radio – specify which RF card (wlan1 or wlan2) is needed to be set.
Click Edit to edit the existing wepkey1 to wepkey4.
By default, four WEP keys are all set to “aaaaa”. They can be modified according to
real need.
Figure 40 – Edit WEP Key
Wireless | MAC ACL
Use the MAC ACL service to control the default access to the wireless interface of the P-720 or
define special access rules for mobile clients. Configure the ACL using the Wireless | MAC ACL menu:
Figure 41 – MAC ACL Service
Radio – Two wireless interfaces wlan1 and wlan2 can be selected for each radio’s MAC ACL rules.
Only AP mode has the MAC ACL service. The wireless interface whose mode is
Bridge hasn’t MAC ACL settings.
Policy Setting – click the edit button to choose Allow, Deny or disable the access control service on
device. By default the ACL service is disabled and all wireless clients connecting to the P-720 are
allowed (no ACL rules are applied to the wireless clients).
Select Allow means only the wireless clients whose MAC are listed in the MAC List would be
permitted to access this AP. Other wireless client cannot access this AP.
Select Deny means only the wireless clients whose MAC are listed in the MAC List would be
prevented from accessing. Other wireless clients can access this AP.